Reillo RL 70  Bahan Bakar Solar

Seri pembakar RL mencakup rentang pembakaran dari 154 hingga 2700 kW, dan telah dirancang untuk digunakan dalam ketel air panas suhu rendah atau sedang, ketel udara atau uap panas, ketel minyak diatermik. Operasi adalah “dua tahap”; burner dilengkapi dengan panel kontrol berbasis mikroprosesor, yang memberikan indikasi status burner dan penyebab kerusakan. Optimalisasi emisi suara dijamin oleh desain khusus dari sirkuit isap udara dan dengan bahan kedap suara yang digabungkan. Peningkatan kinerja kipas dan kepala pembakaran, menjamin fleksibilitas penggunaan dan kerja yang sangat baik di semua tingkat pembakaran. Desain eksklusif memastikan dimensi yang lebih kecil, penggunaan dan perawatan sederhana. Beragam aksesori menjamin peningkatan fleksibilitas kerja.

The RL series of burners covers a firing range from 154 to2700 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation is “two stage”; the burners are fitted with  microprocessor-based control panel, which supplies indication of burner status and fault causes. Optimisation of sound emissions is guaranteed by the special design of the air suction circuit and by incorporated sound proofing material. The elevated performance of the fans and combustion head, guarantee flexibility of use and excellent working at all firing rates. The exclusive design ensures reduced dimensions, simple
use and maintenance. A wide range of accessories guarantees elevated working flexibility.

RL 34 MZ 97/154 ÷ 395 kW                                  
RL 44 MZ 155/235 ÷ 485 kW
RL 50 148/296 ÷ 593 kW
RL 64 MZ 206/391 ÷ 830 kW
RL 70 255/474 ÷ 830 kW
RL 100 356/711 ÷ 1186 kW
RL 130 486/948 ÷ 1540 kW
RL 190 759/1423 ÷ 2443 kW
RL 250 MZ 600/1250 ÷ 2700 kW

Specification   STATE OF SUPPLY

RL 34 MZ – 44 MZ models
Monoblock forced draught oil burner with two stage operation, fully automatic, made up of:
– Air suction circuit with sound proofing material
– High performance fan with straight blades
– Air damper for air setting controlled by an adjustable hydraulic ram
– Starting motor at 2800 rpm, single-phase / 220-230V / 50-60Hz or three-phase 380-400V / 50-60Hz
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– flame stability disk
– Exclusive patented HCS (Housing Cooling System) with high thermal insulation and air circulation with continuous
air volume refresh for an active cooling system and avoid heat transfer to the electrical component housing
– Gears pump for high pressure fuel supply, fitted with:
– filter
– pressure regulator
– connections for installing a pressure gauge and vacuometer
– internal by-pass for single pipe installation
– Valve unit with an oil safety valve and two delivery oil valves on the output circuit
– Photocell for flame detection
– Microprocessor-based burner safety control box, with diagnostic function
– Plugs and Sockets for electrical connection, accessible from the external of the cover
– Burner on/off switch
– Flame inspection window
– 1st – 2nd stage manual switch
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP 44 electric protection level.
Standard equipment:
– 2 flexible pipes for connection to the oil supply network
– 2 gaskets for the flexible pipes
– 2 nipples for connection to the pump
– 4 screws for fixing the burner flange to the boiler
– 1 thermal screen
– 2 Plugs for electrical connection (RL 34-44 MZ single-phase)
– 3 Plugs for electrical connection (RL 44 MZ three-phase)
– 2 slide bar extensions (for the extended head models)
– Instruction handbook for installation, use and maintenance
– Spare parts catalogue.

STATE OF SUPPLY    Specification

RL 50 – 64 MZ – 70 – 100 – 130 – 190 – 250 MZ models
Monoblock forced draught oil burner with two stage operation, fully automatic, made up of:
– Air suction circuit lined with sound-proofing material
– Fan with reverse curve blades (RL 50 – 70 – 100 – 130 models) or straight blades (RL 64 MZ – 190 – 250 MZ models)
– Air damper for air setting controlled by an adjustable hydraulic ram (or by a servomotor for the RL 250 MZ)
– Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– flame stability disk
– Gears pump for high pressure fuel supply, fitted with:
– filter
– pressure regulator
– connections for installing a pressure gauge and vacuometer
– internal by-pass for single pipe installation
– Valve unit with an oil safety valve and two delivery oil valves on the output circuit
– Photocell for flame detection
– Microprocessor-based burner safety control box, with diagnostic function
– Burner on/off switch
– Flame inspection window
– 1st – 2nd stage manual switch
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP 44 electric protection level.
Standard equipment:
– 2 flexible pipes for connection to the oil supply network
– 2 gaskets for the flexible pipes
– 2 nipples for connection to the pump
– 4 screws for fixing the burner flange to the boiler
– 1 thermal screen
– Fairleads for electrical connections (RL 50 models)
– 2 slide bar extensions (for the extended head models and the RL 190 – 250 MZ models)
– Instruction handbook for installation, use and maintenance
– Spare parts catalogue.

Hubungi Kami

PT. INDIRA MITRA BOILER

☎️✔081388666204🔥

Referensi :http://jual burner riello rl 70 -rl100-rl190- light oil