RIELLO RS 28-38-50

RIELLO RS 28-38-50

Direkayasa berkualitas untuk Standar emisi Amerika Utara dan tersedia dalam operasi modulasi penuh, pembakar gas Riello R-Series hadir dengan fitur standar yang menghasilkan efisiensi tinggi dan pengurangan konsumsi bahan bakar untuk aplikasi seperti air panas dan ketel uap, pemanas oli termal, dan proses industri ringan lainnya dengan kebutuhan kapasitas tinggi.
Panel kontrol terintegrasi bawaan pabrik burner RS ​​menawarkan pengoperasian yang mudah digunakan dan kemudahan servis sambil berkontribusi pada desain keseluruhan yang sangat ringkas.
Bahan peredam suara yang tergabung dalam rumah asupan udara lebih lanjut berkontribusi pada operasi kebisingan rendah RS.
Konstruksi aluminium die-cast berkualitas Riello memungkinkan desain RS yang sangat ringkas, ringan, dan mudah dipasang.
Pembakar gas Riello R-Series tersedia dalam laju pembakaran dari 198 hingga 2,2 MBtuh untuk menangani berbagai aplikasi komersial, industri, dan proses. Ditawarkan dalam berbagai konfigurasi dengan aksesori opsional, model RS kami menghadirkan kinerja dan keandalan tanpa kompromi.
Pembakar gas R-Series hingga ukuran 250 tersedia sebagai gaya sasis klasik atau baru.
Pembakar gas chassis klasik R-Series menggunakan Siemens LFL atau Siemens LMV3.
Burner gaya sasis baru menggunakan kontrol Honeywell RM7840L atau Siemens LMV3, dilengkapi lampu indikasi standar (5) dan klakson alarm dengan peredam.

  Two Stage Progressive Gas Burners

RS SERIES The RS burners series covers a firing range from 44 t 2290 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers,diathermic oil boilers. Operation is “two stage progressive”; the burners are fitted
with a microprocessor-based burner safety control box
which supplies indication of operation and diagnosis of
fault cause.
The elevated performance of the fans and combustion
head, guarantee flexibility of use and excellent working at
all firing rates.
The exclusive design ensures reduced dimensions, simple use and maintenance. Optimisation of sound emissions is
guaranteed by the special design of the air suction circuit and by incorporated sound proofing material. A wide range
of accessories guarantees elevated working flexibility.
RS 34 MZ 45/125 ÷ 390 kW
RS 44 MZ 80/203 ÷ 550 kW
RS 50 115/290 ÷ 600 kW
RS 64 MZ 150/400 ÷ 850 kW                                        
RS 70 192/465 ÷ 814 kW
RS 100 232/698 ÷ 1163 kW
RS 130 372/930 ÷ 1512 kW
RS 150 300/900 ÷ 1850 kW
RS 190 470/1279 ÷ 2290 kW

Specification
RS 34 MZ – 44 MZ models
Monoblock forced draught gas burner with two stage operation, fully automatic, made up of:
– Air suction circuit with sound proofing material
– High performance fan with straight blades
– Air damper for air flow setting and butterfly valve for regulating fuel output on 1st and 2nd stage controlled by
a servomotor with variable cam
– Starting motor at 2800 rpm, single-phase / 220-230V / 50-60Hz or three-phase / 380-400V / 50-60Hz
– Combustion head, that can be set on the basis of required output, fitted with:
– stainless steel end cone, resistant to corrosion and high temperatures
– ignition electrodes
– ionisation probe
– gas distributor
– flame stability disk
– Exclusive patented HCS (Housing Cooling System) with high thermal insulation and air circulation with continuous
air volume refresh for an active cooling system and avoid heat transfer to the electrical component housing
– Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
– Microprocessor-based burner safety control box, with diagnostic functions
– Plug and socket for electrical connections accessible from the external of the cover
– Burner on/off selection switch
– 1st – 2nd stage manual switch
– Flame inspection window
– Slide bars for easier installation and maintenance
– Protection filter against radio interference
– IP X0D (IP 40) electric protection level.
Standard equipment
– 1 gas train flange
– 1 flange gasket
– 4 screws for fixing the flange
– 1 thermal screen
– 4 screws for fixing the burner flange to the boiler
– 3 plugs for electrical connection (RS 34 – 44 MZ single-phase)
– 4 plugs for electrical connection (RS 44 MZ three-phase)
– Instruction handbook for installation, use and maintenance
– Spare parts catalogue.

Hubungi Kami

PT Indira  Mitra Boiler

Email: info@indira.co.id

Email: idmratman@gmail.com

Ratman Bejo

☎️✔081388666204🔥